WIKA Capsule Pressure Gauge with Output Signal (PGT63HP.100, PGT63HP.160)

For the process industry, high overload safety

Applications

  • For gaseous, aggressive media, also in aggressive environments
  • Measurements of very low pressures from 2.5 mbar
  • Output signals 4 … 20 mA, 0 … 20 mA, DC 0 … 10 V for the transmission of process values to the control room

Special Features

  • No configuration necessary due to “plug-and-play”
  • High overload safety up to 50 x full scale value
  • Easy-to-read analogue display with nominal sizes 100 and 160
  • Low measuring error and influence on function from medium pollution
  • Measuring chamber protected against unauthorised intervention

Sales Contact (Wika.sales@asyatrafo.com)

Description

Wherever very low pressures have to be indicated locally and, at the same time, a signal transmission to the central control or remote centre is desired, the model PGT63HP intelliGAUGE® (patent, property right: e.g. DE 202007019025) can be used. The robust capsule measuring system has an overload safety of up to 50 times the full scale value. An electronic angle encoder, proven in safety-critical automotive applications, determines the position of the pointer shaft – it is a non-contact sensor and therefore completely free from wear and friction. From this, the electrical output signal proportional to the pressure, e.g. 4 … 20 mA, is produced.

The measuring span (electrical output signal) is adjusted automatically along with the mechanical display, i.e. the scale over the full display range corresponds to 4 … 20 mA. The electrical zero point can also be set manually. The electronic WIKA sensor, integrated into the high-quality capsule pressure gauge, combines the advantages of electrical signal transmission with a local mechanical display that remains readable during a power failure. An additional measuring point for mechanical pressure display can thus be saved.